HP ENVY 13-d000 Maintenance and Service Guide - Page 43
Speakers, from the system board.
View all HP ENVY 13-d000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Speakers Description Speaker Kit (includes left and right speakers and cables) Spare part number 829309-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). 5. Remove the battery (see Battery on page 28). Remove the speakers: 1. Disconnect the speaker cable (1) from the system board. 2. Release the speaker cables from the retention clips (2) and channels built into the keyboard/top cover. 3. Remove the speakers (3) and cables. Reverse this procedure to install the speakers. Component replacement procedures 33