HP ENVY 13-d000 Maintenance and Service Guide - Page 44
Fingerprint reader board, reader board cable from the system board.
View all HP ENVY 13-d000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Fingerprint reader board Description Spare part number Fingerprint reader board 836257-001 NOTE: The fingerprint board spare part kit does not include the fingerprint reader board bracket or the fingerprint reader board cable. The fingerprint reader board bracket is available using spare part number 829302-001. The fingerprint reader board cable is available using spare part number 829295-001. Before removing the fingerprint reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). 5. Remove the battery (see Battery on page 28). Remove the fingerprint reader board: 1. Release the zero insertion force (ZIF) connector (1) to which the fingerprint reader board cable is attached, and then disconnect the fingerprint reader board cable from the system board. 2. Detach the fingerprint reader board cable (2) from the keyboard/top cover. (The fingerprint reader board cable is attached to the keyboard/top cover with double-sided adhesive.) 3. Remove the two Phillips PM2.0×2.5 screws (3) that secure the fingerprint reader board and fingerprint reader board bracket to the keyboard/top cover. 4. Remove the fingerprint reader board bracket (4). 34 Chapter 5 Removal and replacement procedures