HP ENVY 13-d100 Maintenance and Service Guide - Page 38
Battery, Remove the four Phillips PM2.5×4.4 screws
View all HP ENVY 13-d100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
1. Remove the four Phillips PM2.0×2.3 screws (1) that secure the bottom cover retention brackets to the bottom cover. 2. Remove the bottom cover retention brackets (2). Reverse this procedure to install the bottom cover. Battery Description 3-cell, 45-Wh, 3.83-Ah, Li-ion battery Spare part number 816238-850 Before removing the battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). Remove the battery: 1. Disconnect the battery cable (1) from the system board. 2. Remove the four Phillips PM2.5×4.4 screws (2) that secure the battery to the keyboard/top cover. 3. Remove the two Phillips PM2.5×2.6 broad head screws (3) that secure the battery to the keyboard/ top cover. 28 Chapter 5 Removal and replacement procedures