HP ENVY 14t-3000 HP ENVY14 SPECTRE Maintenance and Service Guide IMPORTANT! Th - Page 40
Battery, Remove the three Torx T8M2.0×5.4 screws
View all HP ENVY 14t-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Battery Description 4-cell, 58-Wh, 4.1-Ah, Li-ion battery Spare part number 665460-001 Before disassembling the computer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. Remove the battery: 1. Turn the computer upside down on a flat surface. 2. Slide the battery cover lock latch to the left (1) to unlock the batter cover. 3. Firmly slide the battery cover release latch to the right (2) to release the battery cover. 4. Slide the battery cover (3) away from the computer. 5. Remove the battery cover. The battery cover is available using spare part number 672012-001. 6. Disconnect the battery cable (1) from the system board. 7. Remove the three Torx T8M2.0×5.4 screws (2) and the five Torx T8M2.0×3.6 screws (3) that secure the battery to the computer. 32 Chapter 4 Removal and replacement procedures