HP ENVY 14t-3000 HP ENVY14 SPECTRE Maintenance and Service Guide IMPORTANT! Th - Page 75

Power connector cable, Solid-state drive connector board cable see

Get HP ENVY 14t-3000 PDF manuals and user guides View all HP ENVY 14t-3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

5. Remove the display assembly (2). Reverse this procedure to install the display assembly. Power connector cable Description For use only on computer models equipped with the HM76 chipset For use only on computer models equipped with the HM65 chipset Spare part number 687530-001 672014-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 32), and then remove the following components: a. Solid-state drive connector board cable (see Solid-state drive on page 34) b. Card Reader board cable (see Card Reader board cable on page 36) c. Top cover (see Top cover on page 39) d. WLAN module (see WLAN module on page 52) Component replacement procedures 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
5.
Remove the display assembly
(2)
.
Reverse this procedure to install the display assembly.
Power connector cable
Description
Spare part number
For use only on computer models equipped with the HM76 chipset
687530-001
For use only on computer models equipped with the HM65 chipset
672014-001
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
32
), and then remove the following components:
a.
Solid-state drive connector board cable (see
Solid-state drive
on page
34
)
b.
Card Reader board cable (see
Card Reader board cable
on page
36
)
c.
Top cover (see
Top cover
on page
39
)
d.
WLAN module (see
WLAN module
on page
52
)
Component replacement procedures
67