HP ENVY 14t-3000 HP ENVY14 SPECTRE Maintenance and Service Guide IMPORTANT! Th - Page 56
RTC battery, and then remove the following components
View all HP ENVY 14t-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
3. Remove the two Phillips PM2.0×3.8 screws (1) that secure the speakers to the base enclosure. 4. Remove the speakers (2). Reverse this procedure to install the speakers. RTC battery Description RTC battery (double-sided tape and cable) Spare part number 672013-001 Before removing the RTC battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 32), and then remove the following components: a. Solid-state drive connector board cable (see Solid-state drive on page 34) b. Card Reader board cable (see Card Reader board cable on page 36) c. Top cover (see Top cover on page 39) d. Speakers (see Speakers on page 47) 48 Chapter 4 Removal and replacement procedures