HP ENVY 14t-3000 HP ENVY14 SPECTRE Maintenance and Service Guide IMPORTANT! Th - Page 67
Memory module, System board see
View all HP ENVY 14t-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Memory module Description 8-GB memory module (PC3, 12800, 1333-MHz) 4-GB memory module (PC3, 12800, 1333-MHz) Spare part number 670034-005 641369-005 Before removing the memory module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 32), and then remove the following components: a. Solid-state drive connector board cable (see Solid-state drive on page 34) b. Card Reader board cable (see Card Reader board cable on page 36) c. Top cover (see Top cover on page 39) d. WLAN module (see WLAN module on page 52) e. Wireless audio module (see Wireless audio module on page 50) f. System board (see System board on page 56) Remove the memory module: 1. Turn the system board upside down, with the front toward you. 2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) Component replacement procedures 59