HP ENVY 15-as100 Maintenance and Service Guide - Page 40

Hard drive, Remove the hard drive

Get HP ENVY 15-as100 PDF manuals and user guides View all HP ENVY 15-as100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive rubber bracket or hard drive cable. The hard drive rubber bracket is available using spare part number 857797-001. The hard drive cable is available using spare part number 857806-001. Description 1-TB, 5400-rpm, SATA, 7.2-mm hard drive 500-GB, 5400-rpm, SATA, 7.0-mm hard drive Spare part number 762888-856 683839-856 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery cable from the system board (see Battery on page 31). Remove the hard drive: 1. Release the zero insertion force (ZIF) connector (1) to which the hard drive cable is connected, and then disconnect the hard drive cable from the system board. 2. Remove the hard drive (2). 3. If it is necessary to replace the hard drive cable, disconnect the cable (1) from the hard drive. 32 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive rubber bracket or hard drive cable. The
hard drive rubber bracket is available using spare part number 857797-001. The hard drive cable is available
using spare part number 857806-001.
Description
Spare part number
1-TB, 5400-rpm, SATA, 7.2-mm hard drive
762888-856
500-GB, 5400-rpm, SATA, 7.0-mm hard drive
683839-856
Before removing the hard drive, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
28
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
31
).
Remove the hard drive:
1.
Release the zero insertion force (ZIF) connector
(1)
to which the hard drive cable is connected, and then
disconnect the hard drive cable from the system board.
2.
Remove the hard drive
(2)
.
3.
If it is necessary to replace the hard drive cable, disconnect the cable
(1)
from the hard drive.
32
Chapter 5
Removal and replacement procedures