HP ENVY 15-as100 Maintenance and Service Guide - Page 68
Release the wireless antenna cables, from the retention clip built into the display back cover.
View all HP ENVY 15-as100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
g. Remove the antenna cables and transceivers (4). The antenna are available using spare part number 857817-001. 16. If it is necessary to replace the display hinges: a. Remove the display bezel. b. Remove the display panel. c. Remove the hinge covers. d. Release the wireless antenna cables (1) from the retention clip built into the display back cover. e. Detach the pieces of tape (2) that secure the display hinges to the display back cover. f. Remove the two Phillips M2.0×2.8 screws (3) that secure the display hinges to the display back cover. g. Remove the eight Phillips M2.5×3.1 screws (4) that secure the display hinges to the display back cover. 60 Chapter 5 Removal and replacement procedures
g.
Remove the antenna cables and transceivers
(4)
.
The antenna are available using spare part number 857817-001.
16.
If it is necessary to replace the display hinges:
a.
Remove the display bezel.
b.
Remove the display panel.
c.
Remove the hinge covers.
d.
Release the wireless antenna cables
(1)
from the retention clip built into the display back cover.
e.
Detach the pieces of tape
(2)
that secure the display hinges to the display back cover.
f.
Remove the two Phillips M2.0×2.8 screws
(3)
that secure the display hinges to the display
back cover.
g.
Remove the eight Phillips M2.5×3.1 screws
(4)
that secure the display hinges to the display
back cover.
60
Chapter 5
Removal and replacement procedures