HP ENVY 15-as100 Maintenance and Service Guide - Page 60
Display assembly, Before removing the display assembly, follow these steps
View all HP ENVY 15-as100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
1. Release the display panel cable (1) and the TouchScreen cable from the routing clips and channel built into the right speaker. 2. Detach the piece of tape (2) that secures the speaker cable to the keyboard/top cover. 3. Remove the three Phillips M2.5×3.8 screws (3) that secure the speakers to the keyboard/top cover. 4. Remove the speakers (4). Reverse this procedure to install the speakers. Display assembly NOTE: The TouchScreen display assembly is spared as an entire assembly. The non-TouchScreen display assembly is spared at the subcomponent level. Description Spare part number 15.6-in, RGBW, UHD, WLED, AntiGlare (3840×2160), uslim-flat (2.68-mm), UWVA, eDP+PSR TouchScreen 858712-001 display assembly equipped with HDC and webcam 15.6-in, RGBW, UHD, WLED, AntiGlare (3840×2160), uslim-flat (2.68-mm), UWVA, eDP+PSR TouchScreen 857440-001 display assembly equipped with HDC and webcam 15.6-in, FHD, WLED, BrightView (1920×1080), slim-flat (3.0-mm), UWVA, eDP TouchScreen display assembly equipped with HDC and webcam 858711-001 15.6-in, FHD, WLED, BrightView (1920×1080), slim-flat (3.0-mm), UWVA, eDP TouchScreen display assembly equipped with HDC and webcam 857439-001 Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 52 Chapter 5 Removal and replacement procedures