HP ENVY 15-as100 Maintenance and Service Guide - Page 47
Fan, Remove the Phillips M2.5×3.8 screw
View all HP ENVY 15-as100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Fan Description Fan (includes cable) Spare part number 857805-001 Before removing the fan, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery cable from the system board (see Battery on page 31). Remove the fan: 1. Disconnect the fan cable (1) from the system board. 2. Remove the Phillips M2.5×5.8 screw (2) that secures the fan to the keyboard/top cover. 3. Remove the Phillips M2.5×3.8 screw (3) that secures the fan to the keyboard/top cover. 4. Release the tape (4) that secures the fan to the keyboard/top cover. 5. Remove the fan (5). Reverse this procedure to install the fan. Component replacement procedures 39