HP ENVY 17-3095ca HP ENVY 17 - Maintenance and Service Guide - Page 70
Remove the Phillips PM2.5×4.5 screw, that secures the audio/USB board to
View all HP ENVY 17-3095ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Remove the audio/USB board: 1. Disconnect the following the following cables from the audio/USB board: (1) Audio/USB ZIF cable (included in the audio/USB board spare part kit) (2) Audio/USB cable (included in the audio/USB board spare part kit) (3) Front speaker cable 2. Remove the Phillips PM2.5×4.5 screw (1) that secures the audio/USB board to the base enclosure. 3. Remove the audio/USB board (2). 62 Chapter 4 Removal and replacement procedures ENWW
Remove the audio/USB board:
1.
Disconnect the following the following cables from the audio/USB board:
(1)
Audio/USB ZIF cable (included in the audio/USB board spare part kit)
(2)
Audio/USB cable (included in the audio/USB board spare part kit)
(3)
Front speaker cable
2.
Remove the Phillips PM2.5×4.5 screw
(1)
that secures the audio/USB board to the
base enclosure.
3.
Remove the audio/USB board
(2)
.
62
Chapter 4
Removal and replacement procedures
ENWW