HP ENVY 17-j011nr HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP - Page 91
Fingerprint reader board
View all HP ENVY 17-j011nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
3. Disengage the audio cable (1), disconnect the board (2), and then remove the USB board (3). Reverse this procedure to install the USB board and cables. Fingerprint reader board Description Fingerprint reader board Spare part number 720236-001 Before removing the Fingerprint reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 46). 5. Remove the service cover (see Service cover on page 47). 6. Remove the hard drive (see Hard drive on page 48). 7. Remove the memory modules (see Memory modules on page 51). Component replacement procedures 81