HP ENVY Ultrabook 6-1100 HP ENVY Sleekbook 6 and HP ENVY Ultrabook 6 Maintenan - Page 54
Hard drive, Disconnect the hard drive cable from the system board
View all HP ENVY Ultrabook 6-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Reverse this procedure to install the battery. Hard drive Description 500 GB, 5400 rpm 320 GB, 7200 rpm 320 GB, 5400 rpm 128 GB mSATA solid-state drive 32 GB mSATA solid-state drive Spare part number 683802-005 634862-005 645193-005 687101-001 687100-001 Before removing the hard drive or SSD, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 43). 5. Disconnect the battery cable (see Battery on page 44). Remove the hard drive: 1. Disconnect the hard drive cable from the system board (1), and then remove the 4 screws (2) securing the hard drive to the top cover. 46 Chapter 4 Removal and replacement procedures