HP ENVY Ultrabook 6-1100 HP ENVY Sleekbook 6 and HP ENVY Ultrabook 6 Maintenan - Page 74
USB/Audio board, Remove the subwoofer see
![]() |
View all HP ENVY Ultrabook 6-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
USB/Audio board Description USB/Audio board Spare part number 686597-001 Before removing the USB/Audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 43). 5. Disconnect the battery cable (see Battery on page 44). 6. Remove the subwoofer (see Subwoofer on page 65). Remove the USB/Audio board: 1. Disconnect the USB/Audio board cable from the system board (1) 2. Disconnect the Phillips PM 2.0x2.0 screw securing the USB/Audio board (2). 3. Remove the USB/Audio board (3). 66 Chapter 4 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-envy-ultrabook-cto-6t1100-hp-envy-sleekbook-6-hp-envy-ultrabook-6-maintenance-service-guide-a25ece9/74.png)