HP ENVY Ultrabook 6-1100 HP ENVY Sleekbook 6 and HP ENVY Ultrabook 6 Maintenan - Page 78
Power button board
![]() |
View all HP ENVY Ultrabook 6-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Power button board Description Power button board Spare part number 688003-001 Before removing the Power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 43). 5. Disconnect the battery cable (see Battery on page 44). Remove the Power button board and cable: 1. Turn the top cover upside down, with the back edge toward you. 2. Remove the 2 Phillips PM2.0×3.0 screws securing the power button board to the top cover (1). 70 Chapter 4 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-envy-ultrabook-cto-6t1100-hp-envy-sleekbook-6-hp-envy-ultrabook-6-maintenance-service-guide-a25ece9/78.png)