HP ENVY Ultrabook 6-1100 HP ENVY Sleekbook 6 and HP ENVY Ultrabook 6 Maintenan - Page 84
Top cover, Turn the computer right-side up, with the front toward you.
View all HP ENVY Ultrabook 6-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Top cover Description Spare part number In midnight black finish for use on all computer models (includes power button board and cable and TouchPad and TouchPad cable) 686097-001 In natural silver finish for use only on computer models equipped with an Intel processor (includes 690198-001 power button board and cable and TouchPad and TouchPad cable) Before removing the top cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 43). 5. Disconnect the battery cable (see Battery on page 44). Remove the top cover: 1. Turn the computer right-side up, with the front toward you. 2. Open the computer. 3. Remove the 3 screws from each hinge on the top cover (1), and then remove the top cover (2). Reverse this procedure to install the top cover. 76 Chapter 4 Removal and replacement procedures