HP ENVY Ultrabook 6-1100 HP ENVY Sleekbook 6 and HP ENVY Ultrabook 6 Maintenan - Page 59
TouchPad module, Disconnect the cable
![]() |
View all HP ENVY Ultrabook 6-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
TouchPad module Description Spare part number In midnight black finish for use on all computer models (includes bracket and cable) 688001-001 In natural silver finish for use only on computer models equipped with an Intel processor (includes 691643-001 bracket and cable) Before removing the TouchPad button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 43). Remove the TouchPad button board and cable: 1. Turn the top cover upside down, with the back edge toward you. 2. Disconnect the cable (1) that secures the TouchPad cable to the system board. 3. Remove the 4 Phillips PM 2.5×3.0 black screws (2) that secure the TouchPad button board to the top cover. 4. Remove the 2 Phillips PM 2.5x3.0 silver screws, and then remove the TouchPad bracket (3). Component replacement procedures 51
![](/manual_guide/products/hewlettpackard-envy-ultrabook-cto-6t1100-hp-envy-sleekbook-6-hp-envy-ultrabook-6-maintenance-service-guide-a25ece9/59.png)