HP ENVY Ultrabook 6-1100 HP ENVY Sleekbook 6 and HP ENVY Ultrabook 6 Maintenan - Page 64
Fan, Disconnect the fan cable
View all HP ENVY Ultrabook 6-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Fan Description Fan Spare part number 686580-001 Before removing the fan: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 43). 5. Disconnect the battery cable (see Battery on page 44). Remove the fan: 1. Disconnect the fan cable (1). 2. Remove the 2 Phillips PM screws (2) securing the fan to the unit, and then lift the fan upwards (3). 3. Remove the piece of tape on the underside of the heat sink that secures the fan to the unit (4). 56 Chapter 4 Removal and replacement procedures