HP ENVY dv4t-5300 HP Envy dv4 Notebook PC Maintenance and Service Guide - Page 46
from the hard drive. The hard, If necessary, disconnect the hard drive connector cable
View all HP ENVY dv4t-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
3. Use the tab (3) to lift and remove the hard drive from the hard drive bay. 4. If it is necessary to disassemble the hard drive, perform the following steps: a. Separate the front edges of the hard drive rubber bracket (1) from the hard drive b. Remove the hard drive (2) from the bracket. c. If necessary, disconnect the hard drive connector cable (3) from the hard drive. The hard drive rubber bracket and hard drive connector cable are available in the Hard Drive Hardware Kit, spare part number 676647-001. To install a hard drive, reverse the removal procedure. 38 Chapter 4 Removal and replacement procedures
3.
Use the tab
(3)
to lift and remove the hard drive from the hard drive bay.
4.
If it is necessary to disassemble the hard drive, perform the following steps:
a.
Separate the front edges of the hard drive rubber bracket
(1)
from the hard drive
b.
Remove the hard drive
(2)
from the bracket.
c.
If necessary, disconnect the hard drive connector cable
(3)
from the hard drive. The hard
drive rubber bracket and hard drive connector cable are available in the Hard Drive
Hardware Kit, spare part number 676647-001.
To install a hard drive, reverse the removal procedure.
38
Chapter 4
Removal and replacement procedures