HP ENVY dv4t-5300 HP Envy dv4 Notebook PC Maintenance and Service Guide - Page 66
Remove the system board, that secure the system board
View all HP ENVY dv4t-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Remove the system board: 1. Disconnect the following cables from the system board: (1) Display panel cable (2) Speaker cable (3) Optical drive connector cable (4) Power connector cable 2. Remove the three Phillips M2.0×5.0 screws (1) that secure the system board to the base enclosure. 3. Lift the right side of the system board (2) until it rests at an angle. 58 Chapter 4 Removal and replacement procedures
Remove the system board:
1.
Disconnect the following cables from the system board:
(1)
Display panel cable
(2)
Speaker cable
(3)
Optical drive connector cable
(4)
Power connector cable
2.
Remove the three Phillips M2.0×5.0 screws
(1)
that secure the system board to
the base enclosure.
3.
Lift the right side of the system board
(2)
until it rests at an angle.
58
Chapter 4
Removal and replacement procedures