HP ENVY dv4t-5300 HP Envy dv4 Notebook PC Maintenance and Service Guide - Page 58
disconnect the power button board, cable from the system board.
View all HP ENVY dv4t-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
2. Remove the eight Phillips M2.5×6.5 screws (2) that secure the top cover to the computer. 3. Remove the seven Phillips M2.0×3.5 screws that secure the top cover to the computer. 4. Turn the computer right side up, with the front toward you. 5. Open the computer. 6. Release the ZIF connector to which the power button board cable is connected, and then disconnect the power button board (1) cable from the system board. 50 Chapter 4 Removal and replacement procedures
2.
Remove the eight Phillips M2.5×6.5 screws
(2)
that secure the top cover to the computer.
3.
Remove the seven Phillips M2.0×3.5 screws that secure the top cover to the computer.
4.
Turn the computer right side up, with the front toward you.
5.
Open the computer.
6.
Release the ZIF connector to which the power button board cable is connected, and then
disconnect the power button board
(1)
cable from the system board.
50
Chapter 4
Removal and replacement procedures