HP ENVY m6-n012dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 49

Hard drive, Release the zero insertion force ZIF connector

Get HP ENVY m6-n012dx PDF manuals and user guides View all HP ENVY m6-n012dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket or hard drive connector cable. The hard drive bracket and hard drive connector cable are included in the Hard Drive Hardware Kit, spare part number 720545-001. Description For use on all computer models: 1.5-TB, 5400-rpm, 9.5-mm 1.0-TB, 5400-rpm, 9.5-mm 750-GB, 5400-rpm, 9.5-mm 750-GB, 5400-rpm, 9.5-mm, 8-GB hybrid For use only on computer models equipped with an Intel processor: 1.0-TB, 5400-rpm, SATA, 7.0-mm, hybrid 8-GB 500-GB, 5400-rpm, SATA, 9.5-mm 500-GB, 5400-rpm, SATA, 7.0-mm, hybrid 8-GB Spare part number 747375-001 676521-001 652012-001 732001-001 731999-001 683802-001 732000-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the service cover (see WLAN module on page 38). Remove the hard drive: 1. Release the zero insertion force (ZIF) connector (1) to which the hard drive connector cable is attached, and then disconnect the hard drive connector cable (2) from the system board. 2. Release the hard drive connector cable from the tab (3) in the base enclosure. Component replacement procedures 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket or hard drive connector
cable. The hard drive bracket and hard drive connector cable are included in the Hard Drive
Hardware Kit, spare part number 720545-001.
Description
Spare part number
For use on all computer models:
1.5-TB, 5400-rpm, 9.5-mm
747375-001
1.0-TB, 5400-rpm, 9.5-mm
676521-001
750-GB, 5400-rpm, 9.5-mm
652012-001
750-GB, 5400-rpm, 9.5-mm, 8-GB hybrid
732001-001
For use only on computer models equipped with an Intel processor:
1.0-TB, 5400-rpm, SATA, 7.0-mm, hybrid 8-GB
731999-001
500-GB, 5400-rpm, SATA, 9.5-mm
683802-001
500-GB, 5400-rpm, SATA, 7.0-mm, hybrid 8-GB
732000-001
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
37
).
5.
Remove the service cover (see
WLAN module
on page
38
).
Remove the hard drive:
1.
Release the zero insertion force (ZIF) connector
(1)
to which the hard drive connector cable is
attached, and then disconnect the hard drive connector cable
(2)
from the system board.
2.
Release the hard drive connector cable from the tab
(3)
in the base enclosure.
Component replacement procedures
41