HP ENVY m6-n012dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 84
TouchPad assembly, Remove the TouchPad
View all HP ENVY m6-n012dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
TouchPad assembly Description TouchPad assembly (includes TouchPad bracket, TouchPad button board, TouchPad, and cables) Spare part number 760041-001 Before removing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 37), and then remove the following components: a. Service cover (see WLAN module on page 38) b. Hard drive (see Hard drive on page 41) c. Base enclosure (see Base enclosure on page 48) d. System board (see System board on page 60) Remove the TouchPad: 1. Remove the six Phillips PM2.0×2.9 screws (1) that secure the TouchPad bracket to the top cover. 2. Remove the TouchPad bracket (2). 76 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts