HP ENVY m6-n012dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 62

The screw covers are available in the Rubber Kit, spare part number 720559-001.

Get HP ENVY m6-n012dx PDF manuals and user guides View all HP ENVY m6-n012dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

9. Remove the display assembly (2) from the computer. NOTE: Steps 10 through 16 apply only to computer models equipped with an Intel processor. 10. If it is necessary to replace the display bezel or any of the display assembly subcomponents: a. Remove the two screw covers (1) and the four Phillips PM2.5×3.2 broad head screws (2) that secure the display bezel to the display assembly. The screw covers are available in the Rubber Kit, spare part number 720559-001. b. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure. 54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
9.
Remove the display assembly
(2)
from the computer.
NOTE:
Steps 10 through 16 apply only to computer models equipped with an Intel processor.
10.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Remove the two screw covers
(1)
and the four Phillips PM2.5×3.2 broad head screws
(2)
that secure the display bezel to the display assembly.
The screw covers are available in the Rubber Kit, spare part number 720559-001.
b.
Flex the inside edges of the top edge
(1)
, the left and right sides
(2)
, and the bottom edge
(3)
of the display bezel until the bezel disengages from the display enclosure.
54
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts