HP ENVY m6-n012dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 79

Power connector cable

Get HP ENVY m6-n012dx PDF manuals and user guides View all HP ENVY m6-n012dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 79 highlights

Power connector cable Description Power connector cable Spare part number 720537-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 37), and then remove the following components: a. Service cover (see WLAN module on page 38) b. Hard drive (see Hard drive on page 41) c. Base enclosure (see Base enclosure on page 48) Remove the power connector cable: 1. Disconnect the power cable (1) from the system board. 2. Release the power connector cable from the clips (2) built into the keyboard shield. 3. Release the power connector (3) from the clips and mold built into the top cover. 4. Remove the power connector cable. Reverse this procedure to install the power connector cable. Component replacement procedures 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Power connector cable
Description
Spare part number
Power connector cable
720537-001
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
37
), and then remove the following components:
a.
Service cover (see
WLAN module
on page
38
)
b.
Hard drive (see
Hard drive
on page
41
)
c.
Base enclosure (see
Base enclosure
on page
48
)
Remove the power connector cable:
1.
Disconnect the power cable
(1)
from the system board.
2.
Release the power connector cable from the clips
(2)
built into the keyboard shield.
3.
Release the power connector
(3)
from the clips and mold built into the top cover.
4.
Remove the power connector cable.
Reverse this procedure to install the power connector cable.
Component replacement procedures
71