HP ENVY m6-n012dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 80

Subwoofer, Remove the subwoofer

Get HP ENVY m6-n012dx PDF manuals and user guides View all HP ENVY m6-n012dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

Subwoofer Description Subwoofer (includes cable and 3 isolators) Spare part number 720563-001 Before removing the subwoofer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 37), and then remove the following components: a. Service cover (see WLAN module on page 38) b. Hard drive (see Hard drive on page 41) c. Base enclosure (see Base enclosure on page 48) Remove the subwoofer: 1. Disconnect the subwoofer cable (1) from the system board. 2. Remove the three Phillips PM2.5×6.2 screws (2) that secure the subwoofer to the top cover. 72 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Subwoofer
Description
Spare part number
Subwoofer (includes cable and 3 isolators)
720563-001
Before removing the subwoofer, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
37
), and then remove the following components:
a.
Service cover (see
WLAN module
on page
38
)
b.
Hard drive (see
Hard drive
on page
41
)
c.
Base enclosure (see
Base enclosure
on page
48
)
Remove the subwoofer:
1.
Disconnect the subwoofer cable
(1)
from the system board.
2.
Remove the three Phillips PM2.5×6.2 screws
(2)
that secure the subwoofer to the top cover.
72
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts