HP ENVY m7-u100 Maintenance and Service Guide - Page 43
TouchPad, Detach the TouchPad cable
View all HP ENVY m7-u100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
5. Remove the optical drive brackets (2). Reverse this procedure to reassemble and install the optical drive. TouchPad Description Spare part number TouchPad 857830-001 NOTE: The TouchPad spare part kit does not include the TouchPad bracket or TouchPad cable. The TouchPad bracket is available using spare part number 857825-001. The TouchPad cable is available using spare part number 857836-001. Before removing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24). 5. Remove the battery (see Battery on page 26). 6. Remove the optical drive (see Optical drive on page 34). Remove the TouchPad: 1. Release the ZIF connector (1) to which the TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Detach the TouchPad cable (2) from the TouchPad. (The TouchPad cable is attached to the TouchPad with double-sided adhesive.) 3. Detach the pieces of grounding tape (3) that secure the TouchPad to the keyboard/top cover. 4. Remove the three Phillips M2.0×2.3 broad head screws (4) that secure the TouchPad and TouchPad bracket to the keyboard/top cover. Component replacement procedures 35