HP EliteBook 1030 Maintenance and Service Guide - Page 32
Removal and replacement procedures for Authorized Service Provider parts
View all HP EliteBook 1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
5 Removal and replacement procedures for Authorized Service Provider parts CAUTION: Components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the computer or void the warranty. Component replacement procedures NOTE: Details about your computer, including model, serial number, product key, and length of warranty, are on the service tag at the bottom of your computer. See Service tag on page 12 for details. This chapter provides removal and replacement procedures. There are as many as 47 screws that must be removed, replaced, or loosened when servicing Authorized Service Provider only parts. Make special note of each screw size and location during removal and replacement. Bottom cover Description Bottom cover Spare part number 842283-001 Before removing the bottom cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. Remove the bottom cover: 1. Remove the seven Torx T8M2.0×5.0 screws (1) and the four Torx T8M2.0×3.5 screws (2) that secure the bottom cover to the computer. 24 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts