HP EliteBook 1030 Maintenance and Service Guide - Page 45
Open the computer so the display is at an approximate 90 degree angle
View all HP EliteBook 1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
6. Disconnect the antennas from the WLAN module (2). 7. Remove the WLAN antenna from the clips and routing path built into the computer (3). 8. Disconnect the webcam cable from the system board (4). 9. Remove the four Phillips PM2.5×4.0 screws (1) that secure the display to the computer. 10. Open the computer so the display is at an approximate 90 degree angle (2). Component replacement procedures 37
6.
Disconnect the antennas from the WLAN module
(2)
.
7.
Remove the WLAN antenna from the clips and routing path built into the computer
(3)
.
8.
Disconnect the webcam cable from the system board
(4)
.
9.
Remove the four Phillips PM2.5×4.0 screws
(1)
that secure the display to the computer.
10.
Open the computer so the display is at an approximate 90 degree angle
(2)
.
Component replacement procedures
37