HP EliteBook 1030 Maintenance and Service Guide - Page 59

Speaker assembly, Remove the three Phillips PM2.0×3.0 screws

Get HP EliteBook 1030 PDF manuals and user guides View all HP EliteBook 1030 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Speaker assembly Description Speaker assembly (includes cable) Spare part number 837352-001 Before removing the speaker assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24). 5. Remove the battery (see Battery on page 43). 6. Remove the system board (see System board on page 48). Remove the speaker assembly: 1. Remove the three Phillips PM2.0×3.0 screws (1) that secure the speaker to the computer. 2. Remove the speaker (2) from the computer. Reverse this procedure to install the speaker. Component replacement procedures 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Speaker assembly
Description
Spare part number
Speaker assembly (includes cable)
837352-001
Before removing the speaker assembly, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
24
).
5.
Remove the battery (see
Battery
on page
43
).
6.
Remove the system board (see
System board
on page
48
).
Remove the speaker assembly:
1.
Remove the three Phillips PM2.0×3.0 screws
(1)
that secure the speaker to the computer.
2.
Remove the speaker
(2)
from the computer.
Reverse this procedure to install the speaker.
Component replacement procedures
51