HP EliteBook 1030 Maintenance and Service Guide - Page 55

ForcePad (Touchpad), Remove the ForcePad

Get HP EliteBook 1030 PDF manuals and user guides View all HP EliteBook 1030 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

ForcePad (Touchpad) Description ForcePad Cable Kit Spare part number 842287-001 842293-001 Before removing the ForcePad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24). 5. Remove the battery (see Battery on page 43). Remove the ForcePad: 1. Disconnect the ForcePad cable (1) from the system board. 2. Disconnect the NFC module antenna cable (2) from the ForcePad. 3. Remove the six Phillips PM2.0×2.0 broadhead screws (3) that secure the ForcePad to the computer, and then lift the ForcePad from the computer (4). Reverse the removal procedures to install the ForcePad. Component replacement procedures 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
ForcePad (Touchpad)
Description
Spare part number
ForcePad
842287-001
Cable Kit
842293-001
Before removing the ForcePad, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
24
).
5.
Remove the battery (see
Battery
on page
43
).
Remove the ForcePad:
1.
Disconnect the ForcePad cable
(1)
from the system board.
2.
Disconnect the NFC module antenna cable
(2)
from the ForcePad.
3.
Remove the six Phillips PM2.0×2.0 broadhead screws
(3)
that secure the ForcePad to the computer, and
then lift the ForcePad from the computer
(4)
.
Reverse the removal procedures to install the ForcePad.
Component replacement procedures
47