HP EliteBook G3 EliteBook 820 G3 Notebook PC EliteBook 828 G3 Notebook PC- Mai - Page 47
Reverse this procedure to install a hard drive.
![]() |
View all HP EliteBook G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4. To remove the hard drive cover and bracket from the hard drive, lift the Mylar cover up off the drive, remove the 4 Phillips PM3.0×3.0 screws (1) that secure the bracket to the drive, and then lift the bracket up and off the hard drive (2). Reverse this procedure to install a hard drive. NOTE: Only a hard drive or an SSD can be installed. To install a hard drive, be sure that the standee is stored beside the hard drive slot and not installed across from the SSD connector. Component replacement procedures 37
![](/manual_guide/products/hewlettpackard-elitebook-828-elitebook-820-g3-notebook-pc-elitebook-828-g3-notebook-pc-maintenance-service-guide-6aee7f0/47.png)
4.
To remove the hard drive cover and bracket from the hard drive, lift the Mylar cover up
off
the drive,
remove the 4 Phillips PM3.0×3.0 screws
(1)
that secure the bracket to the drive, and then lift the bracket
up and
off
the hard drive
(2)
.
Reverse this procedure to install a hard drive.
NOTE:
Only a hard drive or an SSD can be installed. To install a hard drive, be sure that the standee is stored
beside the hard drive slot and not installed across from the SSD connector.
Component replacement procedures
37