HP EliteBook G3 EliteBook 820 G3 Notebook PC EliteBook 828 G3 Notebook PC- Mai - Page 69
Speaker assembly, Remove the bottom cover see
![]() |
View all HP EliteBook G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
4. Lift the smart card reader board left to remove it from the top cover (5). Reverse this procedure to install the card reader board. Speaker assembly Description Speaker assembly (includes cable) Spare part number 821684-001 Before removing the speaker assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 32). 5. Remove the battery (see Battery on page 35). 6. Remove the system board (see System board on page 49). Remove the speaker assembly: 1. Remove the two Phillips PM2.5x3.0 screws that secure the speakers to the computer (1). Component replacement procedures 59
![](/manual_guide/products/hewlettpackard-elitebook-828-elitebook-820-g3-notebook-pc-elitebook-828-g3-notebook-pc-maintenance-service-guide-6aee7f0/69.png)