HP EliteBook G3 EliteBook 820 G3 Notebook PC EliteBook 828 G3 Notebook PC- Mai - Page 72
CAUTION, of the bezel, the inside edges of the left
View all HP EliteBook G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
3. Remove the WWAN antennas (1) and WLAN antennas (2) (if equipped) from the routing path along the base of the computer. 4. Remove the 4 Phillips PM2.5×5.0 screws (1) from the display hinges. 5. Lift the hinges (2) up and remove the top cover from the display assembly (3). CAUTION: When installing the display assembly, be sure that the wireless antenna cables are routed and arranged properly. Failure to properly route the antennas can result in degradation of the computer's wireless performance. 6. If you need to remove the display bezel, flex the top (1) of the bezel, the inside edges of the left and right sides (2), and then the bottom (3) of the bezel until it disengages from the display enclosure. NOTE: Make sure the hinges are not bent (see hinge position in following image) when you remove the bezel. 62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts