HP EliteBook G3 EliteBook 820 G3 Notebook PC EliteBook 828 G3 Notebook PC- Mai - Page 57
the top cover
![]() |
View all HP EliteBook G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
4. Insert a screwdriver or similar thin tool into the hole beside the heat sink/fan assembly, and then press on the back of the keyboard until it disengages from the computer (2). Rotate the top of the keyboard upward, and then lift the keyboard up at an angle to disengage the tabs at the bottom of the keyboard. NOTE: Cables connect the bottom of the keyboard to the system board. Make sure not to prematurely pull the keyboard cables out of the system board connectors. 5. Slide the keyboard slightly downward toward the palm rest to disengage the top of the keyboard from the top cover (1). Remove the pointing stick cable (2), the keyboard backlight cable (3), and the keyboard cable (4). 6. Remove the keyboard (5). Component replacement procedures 47
![](/manual_guide/products/hewlettpackard-elitebook-828-elitebook-820-g3-notebook-pc-elitebook-828-g3-notebook-pc-maintenance-service-guide-6aee7f0/57.png)