HP EliteBook G3 EliteBook 820 G3 Notebook PC EliteBook 828 G3 Notebook PC- Mai - Page 68
Smart card reader board, Remove the smart card reader board
![]() |
View all HP EliteBook G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Smart card reader board Description Smart card reader board (includes cable) Spare part number 821695-001 Before removing the card reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 32). 5. Remove the battery (see Battery on page 35). 6. Remove the system board (see System board on page 49). Remove the smart card reader board: NOTE: Before you remove the smart card reader, make sure nothing (memory card or plastic insert) in installed. 1. Disconnect the cable from the board (1). 2. Disconnect the cable from the touchpad (2). 3. Remove the 3 Phillips PM2.5x3.0 screws that secure the bracket to the top cover (3), and then lift to remove it from the computer (4). 58 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
![](/manual_guide/products/hewlettpackard-elitebook-828-elitebook-820-g3-notebook-pc-elitebook-828-g3-notebook-pc-maintenance-service-guide-6aee7f0/68.png)