HP Indigo 20000 CA493-00130 Rev - Page 17
Reinstall the rubber charge roller from the charge roller assembly.
View all HP Indigo 20000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
7. Insert the new motor into position. Figure 3-22 Inserting new motor into position 8. Connect the motor connector. 9. Reinstall the back panel. 10. Fasten the motor into position using the four Allen screws. 11. Reinstall the rubber charge roller from the charge roller assembly. 12. Reinstall the charge roller assembly to the press. Replacing the Jump-Over-Seam (JOS) motor 15
7.
Insert the new motor into position.
Figure 3-22
Inserting new motor into position
8.
Connect the motor connector.
9.
Reinstall the back panel.
10.
Fasten the motor into position using the four Allen screws.
11.
Reinstall the rubber charge roller from the charge roller assembly.
12.
Reinstall the charge roller assembly to the press.
Replacing the Jump-Over-Seam (JOS) motor
15