HP Indigo 20000 CA493-00130 Rev - Page 19
Remove the 5 screws on the side of the endcap with a Philips screwdriver.
View all HP Indigo 20000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
14. Remove the front endcap by removing the 2 screws near the motor with a 3mm hex key. Remove the rear endcap by removing the 2 screws on the back with a 2.5mm hex key. Figure 3-24 Removing the endcaps 15. Remove the 5 screws on the side of the endcap with a Philips screwdriver. Figure 3-25 Removing the screws in the endcap Replacing the Jump-Over-Seam (JOS) motor 17
14.
Remove the front endcap by removing the 2 screws near the motor with a 3mm hex key. Remove the
rear endcap by removing the 2 screws on the back with a 2.5mm hex key.
Figure 3-24
Removing the endcaps
15.
Remove the 5 screws on the side of the endcap with a Philips screwdriver.
Figure 3-25
Removing the screws in the endcap
Replacing the Jump-Over-Seam (JOS) motor
17