HP Integrity Superdome SX2000 AD380A and AD381A PCIe 2-Port Gigabit Ethernet C - Page 19
Specifications and Regulatory Information, Card Specifications
View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2 Specifications and Regulatory Information This chapter provides an overview of the AD380A and AD381A 2-Port GbE Ethernet cards and lists their physical and environmental specifications. Card Specifications Adapter specs for the AD380A and AD381A are as follows: Table 2-1 AD380A and AD381A card specifications Specification Network Controller Chipset Bus Type Bus Width Clock Speed On-board Memory Data Transfer Method Boot ROM Support Management Capabilities Power Requirement Data Transmission Rate Description Intel® 82571EB Dual MAC/PHY x4 PCI Express v1.0a Four lane 100 MHz 96 KB Bus Master DMA Yes WOL, PXE 2.2, ACPI 1.1a 1280 mA @ 3.3 VDC max AD380A (copper): 10 Full/10 Half, 100 Full/100 Half, 1000 Full AD381A (fiber): 1000 Full Standards Supported Dimensions Connectors and Distances IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE 802.3z, IEEE 802.3x (flow control), IEEE 802.3ad (link aggregation), IEEE 802.1p (QoS), IEEE 802.1q (VLAN tagging) 12.95 cm x 6.86 cm [5.1 in x 2.7 in (L x W)] (without bracket) AD380A (copper): 10BASE-T: Category 3, 4, or 5 UTP, 100 M (328 ft) 100BASE-TX: CAT5 UTP, 100 M (328 ft) 1000BASE-TX: CAT5 UTP, 100 M (328 ft) AD381A (fiber): 1000Base-SX: Multimode fiber (62.5 or 50 Micron) Interrupts Supported Temperature Range Automatically configured Operating: 0°C to 55°C (32°F to 131°F) Storage: -30°C to 60°C (-22°F to 140°F) Relative Humidity (noncondensing) Operating: 20% to 75% Storage: 20% to 80% Safety Compliance UL Mark (US and Canada) CE Mark EN 60590 RoHS (European Union) Card Specifications 19