HP Kayak XU 04xx HP Kayak XU PC Workstation Technical Reference Manual Hardwar - Page 50
BT/100TX LAN Features, Remote Power On, Vstandby requirements, supporting RPO
![]() |
View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3 Interface Boards and Mass-Storage Drives 10BT/100TX LAN Controller 10BT/100TX LAN Features Feature: LAN Controller RJ45 Connector Remote Boot ExtStart Connector Remote Power On Remote Wake Up Description: AMD PCNET-Fast chip 10BT/100TX autonegotiation Protocols integrated in System BIOS • Connection to CPU board • LAN remote power on signals • Full remote power on with Magic Packet • Wake Up from Suspend state with Magic Packet Remote Power On Remote Power On (RPO) is available at 10 and 100 Mbits per second. Vstandby requirements supporting RPO The Vstandby requirements for HP network cards supporting RPO, is: • A power supply able to deliver at least 250mA on Vstandby output. This is the case for all HP Kayak systems. Optional Bootrom Socket It is possible to add a flash device on the network card socket with a specific LAN bootrom code. This new bootrom code will be seen and mapped automatically by the system BIOS instead of the embedded version (system BIOS). NOTE At the time this TRM was produced, there was no flashing tool available to allow you to update the bootrom content in the flash on the LAN adapter. A flashing tool for any AMD based card may be available, but in order to use this tool on HP cards, only 29fxxx flash devices must be used. At present, no test has been carried out using this tool on HP cards. Flash / ROM Devices The 10BT/100TX card provides a PLCC 32-pin socket and any size of flash device can be used up to 256KB§. 42
![](/manual_guide/products/hewlettpackard-kayak-xu-04xx-hp-kayak-xu-pc-workstation-technical-reference-manual-hardware-bios-orderable-17e122e/50.png)