HP Kayak XU 04xx HP Kayak XU PC Workstation Technical Reference Manual Hardwar - Page 78

5 Power-On Self-Test and Error Messages Error Message Summary The following table list the error codes, causes and symptoms and the accompanied short message that are displayed in the upper left corner of the screen. Code # Cause / Symptom 0000h Any POST error that is not listed below 0010h 0011h 0012h CMOS Checksum error (if no Serial EEProm) Date and Time most (CMOS backed up from SE2P) PC configuration lost (both SE2P and CMOS lost) 0020h Any POST error regarding an AT option ROM 0021h Any POST error regarding an external PCI card issue 0022h Any POST regarding an AT PnP issue 0030h 0040h 0041 Unsupported CPU speed switch setting Serial number corrupted (bad checksum or null #) Product flag not initialized or bad 0050h Fan not connected (according to CPU) 0060h RPO initialization failure 0100h Keyboard stuck key 0101h 0102h 0103h Keyboard self-test failure Keyboard controller I/O access failure Keyboard not connected 0105h Mouse self-test failure 0106h Mouse not detected (but configured in CMOS) 0108h Mouse and Keyboard connectors reversed 0200h 0201h 0300h Conflict on serial port (@, IRQ) Conflict on parallel port (@, IRQ, DMA) Floppy A: self-test failure 0301h Floppy B: self-test failure Short message (US) System error Incorrect CMOS Checksum Date and Time Lost Incorrect PC Configuration Option ROM Error PCI Error ISA P1P Error Wrong CPU Speed Setting Invalid PC Serial Number Invalid Internal product type Fan Not Connected Remote Power On Error Keyboard Error Keyboard Error Keyboard Error Keyboard Not Connected Mouse Error Mouse Error Keyboard and Mouse Error Serial Port Error Parallel Port Error Flexible Disk Drive A Error Flexible Disk Drive B Error 70