HP LaserJet Pro MFP 4101-4104dw User Guide 2 - Page 72

Method two: Set up the Scan to Network Folder feature via the HP Embedded Web, Server

Page 72 highlights

d. From the Quality Settings drop-down, select the default resolution for scanned files. NOTE: Higher resolution images have more dots per inch (dpi), so they show more detail. Lower resolution images have fewer dots per inch and show less detail, but the file size is smaller. e. In the Filename Prefix field, enter a file name prefix (e.g., MyScan). 10. On the 4. Finish page, review the information and verify all the settings are correct. If there is an error, click the Back button to correct the error. If the settings are correct, click the Save and Test button to test the configuration. 11. When the Congratulations message displays, click Finish to complete the configuration. 12. The Network Folder Profiles dialog now shows the newly added sender email profile. Click Close to exit the wizard. Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server Use the HP Embedded Web Server (EWS) to set up the Scan to Network Folder feature. This method is available for all supported operating systems. Step one: Access the HP Embedded Web Server (EWS) Locate the printer's IP address and then enter it into a Web browser to access the EWS. Your printer must be connected to an IP-based network before you can access the EWS. 1. From the Home screen on the printer control panel, touch the Wireless icon or the Ethernet icon to view the printer's IP address or host name. 2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens. NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer. Step two: Configure the Scan to Network Folder feature Use the Embedded Web Server (EWS) interface to set up the Scan to Folder feature. 1. On the Settings tab in the EWS, click Control Panel Customization, and then click Quick Sets. 2. Click (Add), for Type select Scan to Network Folder, and follow the onscreen instructions for adding a Quick Set profile for a network folder. When finished, click Next. 3. In this page, follow the onscreen instructions for setting up the network folder, authentication requirements, and scan and file configurations. When finished, click Apply. Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204

d.
From the
Quality Settings
drop-down, select the default resolution for scanned files.
NOTE:
Higher resolution images have more dots per inch (dpi), so they show more detail. Lower
resolution images have fewer dots per inch and show less detail, but the file size is smaller.
e.
In the
Filename Prefix
field, enter a file name prefix (e.g., MyScan).
10.
On the
4. Finish
page, review the information and verify all the settings are correct. If there is an error, click
the
Back
button to correct the error. If the settings are correct, click the
Save and Test
button to test the
configuration.
11.
When the
Congratulations
message displays, click
Finish
to complete the configuration.
12.
The
Network Folder Profiles
dialog now shows the newly added sender email profile. Click
Close
to exit the
wizard.
Method two: Set up the Scan to Network Folder feature via the HP Embedded Web
Server
Use the HP Embedded Web Server (EWS) to set up the Scan to Network Folder feature. This method is available
for all supported operating systems.
Step one: Access the HP Embedded Web Server (EWS)
Locate the printer's IP address and then enter it into a Web browser to access the EWS.
Your printer must be connected to an IP-based network before you can access the EWS.
1.
From the Home screen on the printer control panel, touch the Wireless icon
or the Ethernet icon
to
view the printer's IP address or host name.
2.
Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the
printer control panel. Press the
Enter
key on the computer keyboard. The EWS opens.
NOTE:
If a message displays in the web browser indicating that the website might not be safe, select the
option to continue to the website. Accessing this website will not harm the computer.
Step two: Configure the Scan to Network Folder feature
Use the Embedded Web Server (EWS) interface to set up the Scan to Folder feature.
1.
On the
Settings
tab in the EWS, click
Control Panel Customization
, and then click
Quick Sets
.
2.
Click
(
Add
), for
Type
select
Scan to Network Folder
, and follow the onscreen instructions for adding a
Quick Set profile for a network folder. When finished, click
Next
.
3.
In this page, follow the onscreen instructions for setting up the network folder, authentication requirements,
and scan and file configurations. When finished, click
Apply
.
Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server
61