HP Latex 570 User Guide - Page 57
Load a roll into the printer, For roll diameters greater than 200 mm
View all HP Latex 570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Load a roll into the printer TIP: To load a roll of textile substrate, see Loading accessory on page 63; and remember to use the ink collector if the substrate is porous (which textiles usually are). TIP: When loading very thin or very thick substrates, or substrates with a tendency to curl, you should follow the manual loading procedure to reduce the risk of substrate jams and printhead crashes; see Assisted manual load on page 66. 1. For roll diameters greater than 200 mm, remove the loading table spacers. 2. For rolls with a core diameter of 2 inches, install the 2 inch hub kit. a. Remove the central screw (manually or using a flat screwdriver) on both sides. ENWW Load a roll into the printer 51
Load a roll into the printer
TIP:
To load a roll of textile substrate, see
Loading accessory
on page
63
; and remember to use the ink
collector if the substrate is porous (which textiles usually are).
TIP:
When loading very thin or very thick substrates, or substrates with a tendency to curl, you should follow
the manual loading procedure to reduce the risk of substrate jams and printhead crashes; see
Assisted manual
load
on page
66
.
1.
For roll diameters greater than 200 mm, remove the loading table spacers.
2.
For rolls with a core diameter of 2 inches, install the 2 inch hub kit.
a.
Remove the central screw (manually or using a flat screwdriver) on both sides.
ENWW
Load a roll into the printer
51