HP M5035 HP LaserJet M5025/M5035 MFP - Software Technical Reference (external) - Page 308
Remote firmware update through an MS Windows network, files copied, READY, Start, Settings
UPC - 882780574533
View all HP M5035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
Engineering Details 4. Print a configuration page and verify that the firmware revision number matches the revision of the current update. 5. At the command prompt, type exit to close the command window. NOTE Print a menu map to see what user settings are configured in the current firmware. This menu map can be compared with a menu map printed before the firmware update to determine what user settings have been added or changed in the new firmware. To print a menu map from the device control panel, see Print a menu map. Remote firmware update through an MS Windows network If the device is shared on an MS Windows network, follow these instructions: 1. From a command prompt or in an MS-DOS window, type copy /b \ \\, where is the name of the .RFU file (including the path), is the name of the computer (connected to the device by a USB) from which the device is being shared, and is the device share name. For example, type the following: C:\>copy /b c:\xxxxfw.rfu \\COMPUTERNAME\SHARENAME NOTE If the file name or path includes a space, you must enclose the file name or path in quotation marks. For example, type C:\>copy /b "c:\My Documents\xxxxfw.rfu" \\COMPUTERNAME\SHARENAME 2. Press Enter on the keyboard. The messages described in the section Printer messages during the firmware update appear on the control panel. The message 1 file(s) copied appears on the computer screen. 3. The download process begins and the firmware is updated on the device. This can take several minutes. Let the process finish without further interaction with the device or the computer. The messages described in the section Printer messages during the firmware update appear on the control panel. NOTE The device automatically turns off and then on again to activate the update; this can happen more than once. At the end of the update process, the READY message appears on the control panel. Do not turn off the device or interfere with the update until you see this message. 4. Print a configuration page and verify that the firmware revision number matches the revision of the current update. NOTE Print a menu map to see what user settings are configured in the current firmware. This menu map can be compared with a menu map printed before the firmware update to determine what user settings have been added or changed in the new firmware. To print a menu map from the device control panel, see Print a menu map. To share the device, do the following: 1. Click Start. 2. Click Settings. 288 Chapter 7 Engineering Details ENWW