HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 145
Replacing an Expansion Board
UPC - 720591250669
View all HP ML530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
PCI-X Technology Viewing Slot Detail Information To view slot detail information: 1. From the Main menu, highlight the slot and expansion board information to be viewed. 2. Press the Enter key. 3. Select Slot Detail Information from the Slot Options menu. Removing an Expansion Board To remove an expansion board: 1. From the Main menu, highlight the slot and expansion board to be removed. 2. Press the Enter key to go to the Slot Options menu. 3. Use the arrow keys to highlight Remove Expansion Board and press the Enter key. NCMCON then processes the remove request. 4. Be sure that the slot has a status of POWERED down and the green LED is no longer illuminated. 5. Open the expansion slot latch. 6. Remove the expansion board from the slot. NCMCON updates the status of the slot. Replacing an Expansion Board To replace an expansion board: 1. Remove the expansion board from the slot. See the "Hot Removing an Expansion Board" section in this chapter. 2. Be sure that the slot has a status of POWERED down and the green LED is not illuminated. 3. Install the new expansion board in the slot. 4. Close the expansion slot latch. 4-24 HP ProLiant ML530 Generation 2 Server Setup and Installation Guide