HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 261
HP ProLiant logo, Option ROMs - bios no scsi bios
UPC - 720591250669
View all HP ML530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
Troubleshooting 7. Check the server for the following normal power-up sequence to be sure that your system meets the minimal hardware requirements and is powered up during normal operations: a. The power button LED turns from standby (amber) to on (green). b. The fans start up. 8. Check the monitor for the following messages that verify your system meets the minimal hardware requirements and is powered up during normal operations: a. HP ProLiant logo b. BIOS information c. Copyright information d. Processor initialization e. Multi-initiator configuration IMPORTANT: Select the multi-initiator configuration utility (CRTL-A) only to support HP storage and clustering options. See Chapter 8, "Server Configuration and Utilities," for additional information. f. PXE initialization g. Option ROMs h. SCSI devices The operating system loads to complete the boot process. If the server completes POST and attempts to load the operating system, go to the "Problems After Initial Boot" section in this appendix. D-4 HP ProLiant ML530 Generation 2 Server Setup and Installation Guide