HP Mini 210-3060ca HP Mini 210, HP Mini 110, and Compaq Mini CQ10 Maintenance - Page 70
from the system board., Reverse this procedure to reassemble and install the display assembly.
View all HP Mini 210-3060ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
6. Remove the two Phillips M2.0x5.0 screws (4), one beneath each rear corner cover. 7. Remove the WLAN antenna cables (1) from the routing channel. 8. Disconnect the display panel cable (2) from the system board. 9. Carefully lift the base enclosure away from the display assembly (3). Reverse this procedure to reassemble and install the display assembly. 62 Chapter 4 Removal and replacement procedures
6.
Remove the two Phillips M2.0x5.0 screws
(4)
, one beneath each rear corner cover.
7.
Remove the WLAN antenna cables
(1)
from the routing channel.
8.
Disconnect the display panel cable
(2)
from the system board.
9.
Carefully lift the base enclosure away from the display assembly
(3)
.
Reverse this procedure to reassemble and install the display assembly.
62
Chapter 4
Removal and replacement procedures