HP Mini 210-3060ca HP Mini 210, HP Mini 110, and Compaq Mini CQ10 Maintenance - Page 81
Power connector
View all HP Mini 210-3060ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Power connector Description Power connector Spare part number 656095-001 Before removing the power connector, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the service door (see Service door on page 45). 6. Disconnect the hard drive cable from the system board (see Hard drive on page 50). 7. Disconnect the WLAN antenna cables from the WLAN module (see WLAN module on page 46). 8. Disconnect the WWAN antenna cables from the WWAN module (see WWAN module on page 47). 9. Remove the following components: a. Keyboard (see Keyboard on page 53). b. Top cover (see Top cover on page 56). c. Display assembly (see Display assembly on page 61). d. System board (see System board on page 67). Remove the power connector: 1. Loosen the tabs (1) that secure the power connector to the base enclosure. Component replacement procedures 73