HP Mini 311-1028TU HP Pavilion dm1 HP Mini 311 Compaq Mini 311 - Maintenance a - Page 58

Removal and replacement procedures Hard drive ✎ The hard drive spare part kit includes a hard drive connector and hard drive bracket. Description 500-GB, 5400-rpm for use with HP Pavilion 500-GB, 5400-rpm, for use with the HP Pavilion in systems that include a WWAN module 320-GB, 5400-rpm 320-GB, 5400-rpm, for use HP Mini and Compaq Mini in systems that include a WWAN module 320-GB, 5400-rpm, for use with the HP Pavilion in systems that include a WWAN module 250-GB, 5400-rpm 250-GB, 5400-rpm, for use with the HP Mini and Compaq Mini in systems that include a WWAN module 250-GB, 5400-rpm, for use with the HP Pavilion in systems that include a WWAN module 160-GB, 7200-rpm 160-GB, 5400-rpm 160-GB, 5400-rpm, for use with the HP Mini and Compaq Mini in systems that include a WWAN module 160-GB, 5400-rpm, for use with the HP Pavilion in systems that include a WWAN module 80-GB solid state drive (SSD) Spare part number 584512-001 591372-001 580020-001 580020-002 591371-001 580019-001 580019-002 591370-001 591250-001 580018-001 580018-002 591369-001 584513-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the accessory compartment cover (see "WLAN module" on page 4-9). Remove the hard drive: 1. Position the computer with the front toward you. 2. Disconnect the hard drive connector 1. 3. Grasp the Mylar tab 2 in the hard drive bay, and then lift it up at an angle. 4-18 Maintenance and Service Guide